Diamond Pin Wire Cutter
cuts up to 5/64" (2.0 mm) diameter hard wire, 6-1/2" (16.5 cm)Â Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
Distraction Screws
Distraction Screws
package of 5Distraction Screws are an accessory that is usually used alongside distractors or a distraction screwdriver that is spec. These screws are ideally suited for use in spinal surgeries specifically in minimally invasive procedures. These instruments are designed to distract disc space to allow a clearer view of the surgical field to ensure adequate space for the surgeon to perform the spinal surgery. These screws are available in three sizes 14.0 mm, 16.0 mm and 18.0 mm in a package of 5.
Doane “Z” Retractor
double-ended, 15.2 cm long, 1.1 cm wide Doane "Z" Retractor is also known as a Knee Retractor. This retractor is used in knee surgeries and serves a number of different purposes. It can be used to retract all soft tissue surrounding the site of surgery so that only the bony portions are exposed. This retractor features two major turns giving it the characteristic Z shape that allows the handle to remain out of the field of surgery and easily accessible for manipulation. Additionally this instrument is available in two different sizes making it possible to accommodate a variety of surgical approaches and surgeon preferences.
Double Action Pin Cutter
side cutting maximum capacity 1?8" (3.2mm), 9-1/2" (24.1 cm)Double Action Pin Cutter is an instrument ideally suited for use in surgical procedures that require the insertion of surgical pins and subsequently the clipping and resizing of their lengths. Many orthopedic and neurosurgical spinal procedures require the insertion of pins to stabilize a repaired fracture or an inserted graft. These pins often need to be trimmed to allow them to be set at a more appropriate length for the individual patient and these cutter can be used for that. This instrument is double action and is side cutting and has a maximum capacity of 3.2 mm.
Downing Cartilage Knife
concave edge, curved blade, 10" (25.5 cm)Â Downing Cartilage Knife is ideally suited for manipulation of cartilage. A vast array of surgical interventions require a cartilage knife. It can be used to cleanly cut through cartilage which reduces trauma to surrounding areas as well as decreasing the healing time for the patient. This knife features a concave edge and a curved blade and measures 10" long.
Echlin Duckbill Laminectomy Rongeur
Echlin Duckbill Laminectomy Rongeur is an instrument ideally suited for use in orthopedic neurosurgical procedures. It is specifically designed for used in procedure involving the spinal cord and its vertebrae. In a laminectomy the vertebral arch is removed by clipping it on either side and freeing that segment of the individual vertebrae. This rongeur features a duckbill profile that allows it to comfortably access the vertebral laminae and clip them without causing damage to the surrounding tissue areas. Additionally this instrument is available in three sized jaws 2.0, 3.0 and 4.0 mm by 10.0 mm.
Elsberg Ventricular Cannula
closed end, 3 side holes, 4" (10.2 cm)Â Elsberg Ventricular Cannula is a very specific instrument for use in neurosurgical procedures. It is specially designed to penetrate delicate brain tissue and give continued access to brain's ventricular system. This can be useful in procedures where cerebrospinal fluid needs to be sampled in ases such as individuals with brain hernitation. This instrument features three size holes and meausures 4" long. This cannula is available in 5 FR, 7 FR and 9FR diameters.
End Cutter – Barrel Spring, Small, Tungsten Carbide
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
End Cutter – Double Spring, Large, Tungsten Carbide
tungsten carbide jaws, double-action, maximum capacity 3?32" (2.5mm), 8-1/2" (21.6 cm)Â End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue ares where it is being used. Additionally this end cutter is double-action and features tungsten carbide jaws with a maximum capacity of 3/32".
Engel Plaster Saw
stainless blade, 6" (15.0 cm)Â Engel Plaster Saw is ideally suited for use in cutting plaster. This can be particularly useful in cutting through casts that have been set in bone fracture repair. A variety of orthopedic surgical procedures require the placement of a plaster cast to set the bones in the proper orientation while the healing process takes place. The saw is crafted from stainless steel and is specifically designed to effectively cut through this material without dulling the blade.
Esmarch Plaster Knife
metal handle, 7-1/8" (18.0 cm)Â Esmarch Plaster Knife is ideally suited for cutting through plaster. This is specifically needed in cast removal. In order to ensure a bone will effectively heal there is an optimal angle at which it needs to set and a cast can be used to achieve this orientation temporarily during the healing process. At the end of this it is necessary to remove the plaster cast and this can e accomplished with the use of a variety of tools including this plaster knife which features a strong and study metal handle.
Ferris-Smith Spurling Ivd Rongeur
cup jaw, 7" (18.0 cm)Â Ferris-Smith Spurling IVD Rongeur is ideally suite for use in surgical procedures of the spine. Between each vertebrae lies a fibro-cartilaginous segments that is referred to as the intervertebral disc which requires extra care in handling such as provided by this rongeur. This instrument features a unique handling mechanism that sets the length of the body at an angle giving it a gun type silhouette which gives optimal control to the surgeon. Additionally the jaws of this rongeur are of a cup shape and are available set at an angle up, down or straight to accommodate a vast array of surgical scenarios and surgeon preferences.