| Name | Wire Twisting Forceps |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;010286;01-0286;PM914;PM-914;1440-15; |
| Specialty | Neuro, Ortho & Spine-Wire Twisters |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | King Plus Surgical Industry |
| Sterility | Non-Sterile |
| Usage | Reusable |
Wire Twisting Forceps
13.0 mm jaw length, 5-1/2″ (14.0 cm)Â Wire Twisting Forceps are specially designed forceps required to manipulate and twist off wire after it has been secured. Many procedures require the use of wire to stabilize a graft or to give the areas that was operated on additional support. This confers additionally stability thus reducing likelihood of trauma during the recovery period. Often the wire segments that are inserted must be secured by twisting. This instrument features jaws with serrations on them that allow for reduced slippage.
Description
Reviews (0)
Shipping & Delivery
Related products
Hercules-Type Front & Side Cutter
replaceable tungsten carbide blades w/ integrated rubber jaws, for max 1.6 mm drill wire, 7" (17.8 cm)Hercules-Type Front & Side Cutter is a multi-purpose instrument suitable for a variety of orthopedic procedures in which wire or pins are used. Fracture repair procedures can utilize pins to set the bone fragments or can be approximated by wrapping wire around. This instrument is ideally suited for manipulation of wire and pins as well as cutting them either from a front or a side approach. This instrument features replaceable tungsten carbide jaws with integrated rubber jaws for a maximum 1.6 mm drill wire.
Locking Pliers
reinforced jaw hinge, self-locking lever w/ adjustment screw & one-handed quick release Locking Pliers can be used to shape and use wire in many different surgical procedures. A unique feature of this instrument is a reinforced jaw hinge as well as a self-locking lever with adjustment. This makes this instrument highly versatile and able to adapt to a variety of surgical scenarios. Additionally this instrument has a one-handed quick release and is available in three different lengths 7", 8" and 10".
Double Action Pin Cutter
side cutting maximum capacity 1?8" (3.2mm), 9-1/2" (24.1 cm)Double Action Pin Cutter is an instrument ideally suited for use in surgical procedures that require the insertion of surgical pins and subsequently the clipping and resizing of their lengths. Many orthopedic and neurosurgical spinal procedures require the insertion of pins to stabilize a repaired fracture or an inserted graft. These pins often need to be trimmed to allow them to be set at a more appropriate length for the individual patient and these cutter can be used for that. This instrument is double action and is side cutting and has a maximum capacity of 3.2 mm.
K-Wire Side Cutter – Tungsten Carbide
tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm)Â K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.
Berry Sternal Needle Holder & Wire Twister
tungsten carbide inserts, heavy pattern, 6.0 mm jaws, 7-3/4" (19.5 cm)Â Berry Sternal Needle Holder & Wire Twister is a highly versatile instrument that is useful in a vast array of surgical settings. Not only does it serve as a needle holder to aid in suturing during and at the close of surgery but it has other uses as well. The same ability to grip that makes it ideal for use in needle manipulation also makes it ideally suited for twisting wire. Many procedures require the placement of a wire to hold something together or to give some temporary stability while the body heals.
Flat Nose Pliers
serrated jaws, 5-1/2" (14.0 cm)Â Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The wider tip makes this instrument ideal for grasping Steinmann pins and K-wires. Additionally this instrument measure 5.5" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Flat Nose Pliers – Slender Jaws
slender jaws, 2.0 mm tip, 6" (15.2 cm)Â Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.
Delicate Wire Cutter – Tungsten Carbide
tungsten carbide jaws, cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm)Â Delicate Wire Cutter is a versatile instrument crafted for use in trimming and cutting lengths of wire. Procedures such as laminectomies require addition of wire to confer some stability to the vertebrae to prevent trauma as healing occurs. This particular cutter is specifically designed for use with delicate wires. It features tungsten carbide jaws and are capable of cutting hard wire up to a diameter of 0.7 mm.
Reviews
There are no reviews yet.