| Name | Horizontal Retractor |
| Lead Time | 0-3 days |
| Competitor | ;225510;225-510;243500;24-3500;2435-00; |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | King Plus Surgical Industry. |
| Sterility | Non-Sterile |
| Usage | Reusable |
Horizontal Retractor
4×2 sharp prongs, 15.0 mm deep x 25.0 mm height, 6-1/2″ (16.5 cm) maximum opening, 12-1/4″ (31.0 cm)Horizontal Retractor is a general purpose instrument that can be suitable for a wide variety of surgical procedures such as laminectomies. The 4×2 sharp prongs allow it to effectively grasp and keep a hole on the tissue that it is retracting. Additionally the ring handle makes it suitable for manual operation and the ratcheting mechanism allows it to be locked at specific widths.
Description
Reviews (0)
Shipping & Delivery
Related products
Adson Cerebellar Retractor
7-1/2" (19.0 cm), 22.0 mm deep Adson Cerebellar Retractor is a specialized instrument that is used in neurosurgical procedures. This tool can be used for retraction of the cerebellum, it is protected from damage by placement of cotton strips. There is a ratcheting mechanism that allows the ring handles to be locked at a certain width and held there. Additionally this retractor is available with either straight or angled arms and either sharp or blunt prongs makes this a highly versatile instrument that can satisfy any particular surgeon preference of patient need.
Cervical Retractor Lateral Blade
stainless steel, ball snap closure, w/ teeth Cervical Retractor Lateral Blade is an added component to be used alongside the cervical retractor for medial retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth that are variety in their size and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Caspar Nerve Root Retractor
9-1/2" (24.0 cm)Â Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Carbon Fiber Radiolucent Lateral Blade
ball snap closure, w/ teeth Carbon Fiber Radiolucent Lateral Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth giving them added hold in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Aufranc Cobra Retractor
10.0 mm tip, 10-1/2" (26.5 cm)Aufranc Cobra Retractor is a uniquely designed instrument for use in retraction and elevation of spinal roots. This retractor can be used in many different neurosurgical procedures but is especially useful in spinal surgeries. It features a cobra shaped head which gives it a contour well suited for maneuvering in the vicinity of nerve roots and keeping them protected. Additionally this retractor is available in four different tips making it well suited for any procedure: serrated pointed tip, smooth pointed tip, serrated blunt tip, smooth blunt tip.
Caspar-Type Titanium Spinal Spreading System
suitable for dorsal access to the spinal column, interchangeable blades, curved blades allow larger operative area, reduced shadowing during x-ray, unilateral & bilateral access to lamina, lightweight, corrosion resistant titanium Casper Type Titanium Spinal Spreading System a set of instruments and components that is specifically designed for retraction and spreading in orthopedic neurosurgical procedures. This instrument is suitable for dorsal access to the spinal column. It features interchangeable blades which have a slight curvature that allows for a larger operative area and reduce shadowing during x-ray. It allows for unilateral and bilateral access to lamina and is formed from a lightweight, corrosion resistant titanium. It is available as the frame only, blade support with closure, blade supporting with adjustable screw or as a complete set.
Cervical Retractor
9.0 cm spread, hinged frameCervical Retractor is ideally suited for use in retractor of soft tissue and muscle layers in neurosurgical spinal procedures. This instrument can be used at the cervical spinal level in procedures such as laminectomies or hemilaminectomies. Additionally it is available with either a rigid frame or a hinged frame making it more effective at fitting into a variety of different sized patients and opens to a spread of 9.0 cm giving clear access to the surgical field.
Carbon Fiber Radiolucent Medial Blade
ball snap closure, w/ teeth Carbon Fiber Radiolucent Medial Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth giving them added hold in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Reviews
There are no reviews yet.